Polystar's double-head blown film machines benefit from growing T-shirt bag market

Polystar's double-head blown film machines benefit from growing T-shirt bag market Issue date:21/07/2016 Source: CPRJ Editorial Team (JEN)

Taiwan-based Polystar announced that it has sold more than 200 double-head blown film machines for T-shirt bag in 2015-2016 in Asian and Latin American markets. These machines were installed in over 20 countries, including Vietnam, Thailand, Russia, Indonesia, Mexico, Columbia, Chile, Nigeria, etc. Polystar designs and customizes this type of double head blown film machine, which is available in screw diameter of 55mm, 60mm, 65mm and 75mm and film width from 400mm up to 1,000mm on each winder. The double head blown film machine also allows producers to switch between high density polyethylene (HDPE) and low density PE (LDPE) production as well as producing different film width on the same machine on each winder simultaneously. Comparing to extruders with a single die head, the double die extruders can achieve higher production capacity when producing film roll that are small in width, as the high extrusion output is dispersed into two separate channels of the die heads instead of one, explained Polystar. The double head blown film machine provides an economic alternative and has a faster return on investment comparing to a blown film machine equipped with IBC. In the double head blown film machines, higher output can be achieved with a bigger extruder (such as 65mm or 75mm in diameter) even when producing at smaller film width. It is especially effective for T-shirt bag makers who are looking for more economic machines with higher output, the company said. Polystar will live demonstrate the improved double-head blown film machine in Taipei Plas 2016, Vietnam Plas 2016 and Columbia Plas 2016 in September.

Source: http://www.adsalecprj.com/Publicity/MarketNews/lang-eng/article-67023510/NewsArticle.aspx?keyword=polystar

As for more product information, Please go to http://www.polystarco.com/en/products_i_One_Layer_Twin_Head_HDPE_LDPE_LLDPE_800mm.html

As for product video, Please go to https://youtu.be/tZPee0e_Ge4

Email inquiry to us: polystar.sales@gmail.com

Twin head extruder

Twin head extruder - Model DM55-500

Polystar - Original manufacturer of Twin head extruder

Send you inquiry for Twin head extruder to: sales@polystarco.com

Find more information on Twin head extruder on: 
http://www.polystarco.com/en/products_i_F02_Twin_head.html

1. Twin head extruder is single screw equipped with two die heads.

2. Twin head extruder is sold to Myanmar.

Polystar Taiwan manufactures Twin head extruder with capacity from 50-60 kg/hr. Model DM55-500 Twin head extruder produces films max width 400-650mm and thickness of 0.008-0.1mm.

Model DM55-500 Twin head extruder features double die head for producing two film rolls simultaneously. The double die head of Twin head extruder is also able to make plastic films with two different sizes. Twin head extruder is suitable for making small size HDPE/LDPE/LLDPE film.104080

Polystar Machinery is a professional Twin head extruder producer in Taiwan, we design and manufacture Twin head extruder based on your requirement. Polystar has sold Twin head extruder and plastic recycling machine to over 100 countries over 30 years.

Twin head extruder - Model DM55-500

Polystar - Original manufacturer of Twin head extruder

Send you inquiry for Twin head extruder to: sales@polystarco.com

Find more information on Twin head extruder on:
 http://www.polystarco.com/en/products_i_F02_Twin_head.html

ADDRESS: 101, Lane 279, Sec. 1,Fu Chiang Road, Yung Kang Dist., Tainan, Taiwan

TEL: +886-6-2730889 FAX: +886-6-2730887 

E-MAIL: polystar.sales@gmail.com sales@polystarco.com 

www.polystarco.com

Double-head blown film machines are highly efficient for T-shirt bag makers

Double-head blown film machines are highly efficient for T-shirt bag makers

In September, Polystar installed multiple sets of its double head blown film machine in Jalisco, Mexico for the leading T-shirt bag makers in the area. Jalisco is an important area for T-shirt bag making in Mexico and makes up a large percentage of the T-shirt bag production in Mexico, estimated to be around 80% of the entire production.

Normally when producing film rolls suitable for T-shirt bag conversion which ranges from 300~700mm in width, it is difficult to achieve higher output by using a bigger extruder for such small film width unless an IBC (internal bubble cooling) is used.

The double head blown film machine provides an economic alternative and has a much faster return on investment comparing to a blown film machine equipped with IBC. In the double head blown film machines, one can reach much higher output with a bigger extruder (such as 65mm or 75mm in diameter) even when producing at smaller film width. It is especially effective for T-shirt bag makers who are looking for less expensive machines with higher output. 

Comparing to extruders with a single die head, the double die extruders can achieve higher production capacity when producing film roll that are small in width, as the high extrusion output is dispersed into two separate channels of the die heads instead of one.

Polystar designs and customizes this type of double head blown film machine with different screw diameter and roller width depending on the customers’ requirement. Available in screw diameter of 55mm, 60mm, 65mm and 75mm and film width from 400mm up to 1000mm on each winder. The double head blown film machine also allows producers to switch between HDPE and LDPE production as well as producing different film width on the same machine on each winder simultaneously.

A special screw design is used to provide good mixing and stable output for both HDPE and LDPE material. Bimetallic treatment is applied to process a higher percentage of recycled material and CaCO3 compound. Polystar uses Siemens/ABB energy saving motors for the extruders which can reduce energy consumption up to 5%.

Polystar has installed more than 200 sets of the double-head blown film machine in Latin American in more than 15 countries throughout Central and South America. 

http://www.polystarco.com

Twin Head Blown Film Machine

POLYSTAR has installed more than 300 sets of its twin head blownfilm machines in many leading T-shirt bag makers' factory in many countries.

Normally when producing film rolls for T-shirt bag conversion which ranges from 300~700mm in width, it is difficult to achieve higher output by using a bigger extruder for such small film width unless the blown film extruder is equipped with an internal bubble cooling.

The twin head blownfilm machines offers an economic alternative and has a much faster return on investment comparing to a blown film machine installed with internal bubble cooling system (IBC). In the twin head blown film machines, 1 die head can reach much higher output with a bigger extruder (such as 65mm or 75mm in diameter) even when producing smaller width film. It is especially effective for T-shirt bag makers who are looking for machine with higher output but lower cost.

Comparing to extruders with a single die head, the twin die extruders can achieve higher production capacity when producing film roll that are small in width, as the high extrusion output is dispersed into two separate channels of the die heads instead of one.

Polystar designs and customizes this type of twin head blownfilm machines with different screw diameter and roller width depending on the customers’ requirement. Available in screw diameter of 55mm, 60mm, 65mm and 75mm and film width from 400mm up to 1000mm on each winder. twin head blownfilm machines also allows producers to switch between HDPE and LDPE production as well as producing different film width on the same machine on each winder simultaneously.

A special screw design is used to provide good mixing and stable output for both HDPE and LDPE material. Bimetallic treatment is applied to process a higher percentage of recycled material and CaCO3 compound. Polystar uses Siemens/ABB energy saving motors for the extruders which can reduce energy consumption up to 5%.

Polystar has installed more than 200 sets of the twin head blownfilm machines in Latin American in more than 15 countries throughout Central and South America.

http:www.polystarco.com

Dual head blown film machine

Dual head blown film machine - Model DM55-500

Polystar - Original manufacturer of Dual head blown film machine

Send you inquiry for Dual head blown film machine to: sales@polystarco.com

Find more information on Dual head blown film machine on:

http://www.polystarco.com/en/products_i_F02_Twin_head.html



1. Dual head blown film machine is single screw equipped with two die heads.

2. Dual head blown film machine is sold to Myanmar.



Polystar Taiwan manufactures Dual head blown film machine with capacity from 50-60 kg/hr. Model DM55-500 Dual head blown film machine produces films max width 400-650mm and thickness of 0.008-0.1mm.



Model DM55-500 Dual head blown film machine features double die head for producing two film rolls simultaneously. The double die head of Dual head blown film machine is also able to make plastic films with two different sizes. Dual head blown film machine is suitable for making small size HDPE/LDPE/LLDPE film.



Polystar Machinery is a professional Dual head blown film machine producer in Taiwan, we design and manufacture Dual head blown film machine based on your requirement. Polystar has sold Dual head blown film machine and plastic recycling machine to over 100 countries over 30 years.



Dual head blown film machine - Model DM55-500

Polystar - Original manufacturer of Dual head blown film machine

Send you inquiry for Dual head blown film machine to: sales@polystarco.com

Find more information on Dual head blown film machine on:

http://www.polystarco.com/en/products_i_F02_Twin_head.html



Machine series is 104080

www.polystarco.com

Chile's Double head film blowing system

Chile’s Double head film blowing system - Model DM75-800

Polystar - Original manufacturer of Chile’s Double head film blowing system

Send you inquiry for Chile’s Double head film blowing system to: sales@polystarco.com

Twitter of Chile’s Double head film blowing system: https://twitter.com/Polystar_TW

Find more information on Chile’s Double head film blowing system on: http://www.polystarco.com/en/products_i_F02_Twin_head.html





1. Chile’s Double head film blowing system is equipped two die heads

2. Chile’s Double head film blowing system is sold to Chile.



Polystar Taiwan manufactures Chile’s Double head film blowing system with capacity from 30-150 kg/hr. Model DM75-800 Chile’s Double head film blowing system produces 620mm and 640 mm maximum films, with capacity of 120 kg/hr.  103095



Model DM75-800 Chile’s Double head film blowing system features double die head for producing two film rolls simultaneously. The double die head of Chile’s Double head film blowing system is also able to make plastic films with two different sizes. Chile’s Double head film blowing system is suitable for making small size HDPE/LDPE/LLDPE film.



Polystar Machinery is a professional Chile’s Double head film blowing system producer in Taiwan, we design and manufacture Chile’s Double head film blowing system based on your requirement. Polystar has sold Chile’s Double head film blowing system and plastic recycling machine to over 100 countries over 30 years.



Chile’s Double head film blowing system - Model DM75-800

Polystar - Original manufacturer of Chile’s Double head film blowing system

Send you inquiry for Chile’s Double head film blowing system to: sales@polystarco.com

Find more information on Chile’s Double head film blowing system on: http://www.polystarco.com/en/products_i_F02_Twin_head.html

Twitter of Double head film blowing system: https://twitter.com/Polystar_TW

Website of Chile’s Double head film blowing system:

http://www.polystarco.com

Double head blown film line

Double head blown film line - Model DM45-600

Polystar - Original manufacturer of Double head blown film line

Send you inquiry for Double head blown film line to: sales@polystarco.com

Find more information on Double head blown film line on: http://www.polystarco.com/en/products_i_F02_Twin_head.html

Twitter of Double head blown film line : https://twitter.com/Polystar_TW

Success story of Double head blown film line:

http://www.polystarco.com/en/news_i_N2015012200001.html

Website of Double head blown film line:

http://www.polystarco.com

1. Double head blown film line is equipped two die heads

2. Double head blown film line is sold to Sri Lanka



Polystar Taiwan manufactures Double head blown film line with capacity from 30-70 kg/hr. Model DM45-600 Double head blown film line produces 500mm maximum films, with capacity of 40 kg/hr.



Model DM45-600 Double head blown film line features double die head for producing two film rolls simultaneously. The double die head of Double head blown film line is also able to make plastic films with two different sizes. Double head blown film line is suitable for making small size HDPE/LDPE/LLDPE film.



Polystar Machinery is a professional Double head blown film line producer in Taiwan, we design and manufacture Double head blown film line based on your requirement. Polystar has sold Double head blown film line and plastic recycling machine to over 100 countries over 30 years.



Double head blown film line - Model DM45-600

Polystar - Original manufacturer of Double head blown film line

Send you inquiry for Double head blown film line to: sales@polystarco.com

Find more information on Double head blown film line on: http://www.polystarco.com/en/products_i_F02_Twin_head.html

Twitter of Double head blown film line : https://twitter.com/Polystar_TW

Success story of Double head blown film line:

http://www.polystarco.com/en/news_i_N2015012200001.html

Website of Double head blown film line:

http://www.polystarco.com